Signal Strength
-65 dBm or lower (Problem Area)
-50 dBm
-30 dBm
How Measurement Works
Walk around and measure directly on-site without any special equipment
01
Install App
Install the app on a LiDAR-equipped iPhone. To enable channel analysis, connect an additional Android phone as a data collector.
02
Scan Space
Walk slowly to 3D scan with LiDAR while simultaneously recording real-time Wi-Fi signals (dBm) at each spot
03
Check 3D Heatmap
Weak zones are automatically highlighted in red (default: -65 dBm or lower). Multi-story layouts can be separated and viewed by floor.
04
Get Report
Save and share comprehensive reports containing measurement summaries, channel interference details, and recommended actions
Actual Screenshots
3D Heatmap Top View
Automatic Signal Location Display by AP
Result Report
Prerequisites
iPhone
LiDAR-equipped models (iPhone 12 Pro or later Pro models, iPad Pro) — Required
Android
Used as a data collector for channel analysis — Optional (iPhone standalone mode is also available)
Q. Do I need separate measurement equipment?
No. All you need is a LiDAR-equipped iPhone. If you want to perform channel analysis, simply add one additional Android phone
Q. Can multi-story buildings be measured?
Yes. Measurements are taken floor by floor, and the report includes separate heatmaps and evaluations for each individual floor
Q. How do I receive the measurement results?
You will receive a report that includes the 3D heatmap, measurement summary, channel interference details, and recommended actions
Q. Isn't it complicated to use?
We provide a step-by-step PDF guide, and for the actual measurement, all you have to do is walk around the site slowly
Driving Innovation Together
